Quer seja um requisito industrial, alimentar, farmacêutico ou especializado, use este guia para ver as várias opções que podem ser adequadas.
Os cilindros são a solução tradicional de abastecimento para baixo volume de gás. Air Products fornece uma ampla variedade de gases e misturas de gases em diferentes purezas e pressões, em uma ampla variedade de tamanhos de cilindros, desde unidades simples a manifolds.
O Serviço CryoEase® é um conceito moderno para usuários de menor volume de gases puros, líquidos criogênicos ou misturas gasosas por meio de um misturador instalado no local, fornecido com caminhões-tanque especialmente projetados com controles integrados e opções de tanques de armazenamento flexíveis.
Os cilindros são a solução tradicional de abastecimento para baixo volume de gás. Air Products fornece uma ampla variedade de gases e misturas de gases em diferentes purezas e pressões, em uma ampla variedade de tamanhos de cilindros, desde unidades simples a manifolds.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
O Serviço CryoEase® é um conceito moderno para usuários de menor volume de gases puros, líquidos criogênicos ou misturas gasosas por meio de um misturador instalado no local, fornecido com caminhões-tanque especialmente projetados com controles integrados e opções de tanques de armazenamento flexíveis.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
Os cilindros são a solução tradicional de abastecimento para baixo volume de gás. Air Products fornece uma ampla variedade de gases e misturas de gases em diferentes purezas e pressões, em uma ampla variedade de tamanhos de cilindros, desde unidades simples a manifolds.
Os cilindros são a solução tradicional de abastecimento para baixo volume de gás. Air Products fornece uma ampla variedade de gases e misturas de gases em diferentes purezas e pressões, em uma ampla variedade de tamanhos de cilindros, desde unidades simples a manifolds.
O Serviço CryoEase® é um conceito moderno para usuários de menor volume de gases puros, líquidos criogênicos ou misturas gasosas por meio de um misturador instalado no local, fornecido com caminhões-tanque especialmente projetados com controles integrados e opções de tanques de armazenamento flexíveis.
Os separadores de membrana PRISM® contêm milhares de fibras ocas assimétricas que atuam como um filtro molecular. Quando misturas de gás de alta pressão entram no separador, os componentes do gás se dividem como resultado da permeação seletiva.
Nossos sistemas proprietários PRISM® Nitrogen Pressure Swing Adsorption (PSA) estão disponíveis em uma ampla variedade de modelos que podem ser personalizados para atender aos requisitos de aplicação de cada cliente.
A produção no local costuma ser a melhor opção de suprimento para necessidades médias a maiores de oxigênio. Os geradores de adsorção a vácuo com eficiência energética oferecem soluções flexíveis de abastecimento no local. Quando você compra oxigênio sob um acordo local, você se junta a clientes em mais de 50 países que contam com Air Products.
As plantas de separação de ar são especialmente construídas para clientes com grandes demandas de gases por dia. A eficiência energética oferece soluções flexíveis de fornecimento no local com a possibilidade de co-produção de outros gases como nitrogênio ou argônio.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
A produção no local costuma ser a melhor opção de suprimento para necessidades médias a maiores de oxigênio. Os geradores de adsorção a vácuo com eficiência energética oferecem soluções flexíveis de abastecimento no local. Quando você compra oxigênio sob um acordo local, você se junta a clientes em mais de 50 países que contam com Air Products.
PRISM® Hydrogen Generators é um processo altamente eficiente que usa menos gás natural e outras utilidades para economizar energia. Geradores totalmente confiáveis e compactos.
As entregas de gás a granel e os sistemas de armazenamento fornecem uma opção de fornecimento segura e confiável para hidrogênio de alta pureza.
Air Products oferece hidrogênio líquido em uma variedade de purezas e vários modos de fornecimento em todo o mundo, graças à nossa rede de instalações de armazenamento e transfill.
Os cilindros são a solução tradicional de abastecimento para baixo volume de gás. Air Products fornece uma ampla variedade de gases e misturas de gases em diferentes purezas e pressões, em uma ampla variedade de tamanhos de cilindros, desde unidades simples a manifolds.
O Serviço CryoEase® é um conceito moderno para usuários de menor volume de gases puros, líquidos criogênicos ou misturas gasosas por meio de um misturador instalado no local, fornecido com caminhões-tanque especialmente projetados com controles integrados e opções de tanques de armazenamento flexíveis.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
Os separadores de membrana PRISM® contêm milhares de fibras ocas assimétricas que atuam como um filtro molecular. Quando misturas de gás de alta pressão entram no separador, os componentes do gás se dividem como resultado da permeação seletiva.
Os cilindros são a solução tradicional de abastecimento para baixo volume de gás. Air Products fornece uma ampla variedade de gases e misturas de gases em diferentes purezas e pressões, em uma ampla variedade de tamanhos de cilindros, desde unidades simples a manifolds.
Os cilindros são a solução tradicional de abastecimento para baixo volume de gás. Air Products fornece uma ampla variedade de gases e misturas de gases em diferentes purezas e pressões, em uma ampla variedade de tamanhos de cilindros, desde unidades simples a manifolds.
PRISM® Hydrogen Generators é um processo altamente eficiente que usa menos gás natural e outras utilidades para economizar energia. Geradores totalmente confiáveis e compactos.
As entregas de gás a granel e os sistemas de armazenamento fornecem uma opção de fornecimento segura e confiável para hidrogênio de alta pureza.
Os cilindros são a solução tradicional de abastecimento para baixo volume de gás. Air Products fornece uma ampla variedade de gases e misturas de gases em diferentes purezas e pressões, em uma ampla variedade de tamanhos de cilindros, desde unidades simples a manifolds.
O Serviço CryoEase® é um conceito moderno para usuários de menor volume de gases puros, líquidos criogênicos ou misturas gasosas por meio de um misturador instalado no local, fornecido com caminhões-tanque especialmente projetados com controles integrados e opções de tanques de armazenamento flexíveis.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
Os separadores de membrana PRISM® contêm milhares de fibras ocas assimétricas que atuam como um filtro molecular. Quando misturas de gás de alta pressão entram no separador, os componentes do gás se dividem como resultado da permeação seletiva.
Nossos sistemas proprietários PRISM® Nitrogen Pressure Swing Adsorption (PSA) estão disponíveis em uma ampla variedade de modelos que podem ser personalizados para atender aos requisitos de aplicação de cada cliente.
O Serviço CryoEase® é um conceito moderno para usuários de menor volume de gases puros, líquidos criogênicos ou misturas gasosas por meio de um misturador instalado no local, fornecido com caminhões-tanque especialmente projetados com controles integrados e opções de tanques de armazenamento flexíveis.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
Nossos sistemas proprietários PRISM® Nitrogen Pressure Swing Adsorption (PSA) estão disponíveis em uma ampla variedade de modelos que podem ser personalizados para atender aos requisitos de aplicação de cada cliente.
O Serviço CryoEase® é um conceito moderno para usuários de menor volume de gases puros, líquidos criogênicos ou misturas gasosas por meio de um misturador instalado no local, fornecido com caminhões-tanque especialmente projetados com controles integrados e opções de tanques de armazenamento flexíveis.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
Os separadores de membrana PRISM® contêm milhares de fibras ocas assimétricas que atuam como um filtro molecular. Quando misturas de gás de alta pressão entram no separador, os componentes do gás se dividem como resultado da permeação seletiva.
Nossos sistemas proprietários PRISM® Nitrogen Pressure Swing Adsorption (PSA) estão disponíveis em uma ampla variedade de modelos que podem ser personalizados para atender aos requisitos de aplicação de cada cliente.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
Os sistemas criogênicos PRISM® no local fornecem nitrogênio gasoso e oxigênio, bem como argônio para várias aplicações.
As plantas de separação de ar são especialmente construídas para clientes com grandes demandas de gases por dia. A eficiência energética oferece soluções flexíveis de fornecimento no local com a possibilidade de co-produção de outros gases como nitrogênio ou argônio.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
Nossos sistemas proprietários PRISM® Nitrogen Pressure Swing Adsorption (PSA) estão disponíveis em uma ampla variedade de modelos que podem ser personalizados para atender aos requisitos de aplicação de cada cliente.
As entregas a granel em um caminhão fornecem grande quantidade de gases, armazenados no local do cliente como líquido em tanques criogênicos ou como gás em tubos de alta pressão.
Engenheiro de aplicações Microbulk, América do Norte
A pureza do meu gás é adequada para o meu processo?
Os gases industriais (como nitrogênio, hidrogênio e argônio) para atmosferas de fornos são caracterizados por sua pureza muito alta (> 99,995%). Os níveis de impureza típicos são muito menores que 10 partes por milhão em volume (ppmv) de oxigênio e menos de 3 ppmv de umidade (ponto de orvalho <- 90 ° F). Essa pureza é normalmente adequada para muitos processos envolvendo uma ampla variedade de materiais. Alguns materiais, no entanto, devido à sua alta reatividade, podem requerer purificação adicional para atingir níveis ainda mais baixos de impureza, especialmente com gases fornecidos por meio de modos de alimentação a granel ou reboque tubular. Algumas instalações instalam purificadores em linha como uma precaução adicional contra impurezas coletadas da linha de produção. A purificação em linha normalmente envolve a remoção de oxigênio e umidade. Às vezes, com o suprimento de argônio, é necessário remover vestígios de impurezas de nitrogênio. A escolha do purificador depende do gás e do tipo e quantidade de impurezas a serem removidas.
Find the most suitable welding gas for all your welding needs
M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M24 ArCO7 / 2.5 Ferromaxx® 7 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 7% Carbon dioxide in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
80% Ar / 2% CO2 M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.
50% Ar / 50% CO2 M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 47 litre steel cylinder at 90 bar.
M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
80% Ar / 2% CO2 M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.
50% Ar / 50% CO2 M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 47 litre steel cylinder at 90 bar.
M24 ArCO7 / 2.5 Ferromaxx® 7 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 7% Carbon dioxide in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.
M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.
M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M24 ArCO7 / 2.5 Ferromaxx® 7 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 7% Carbon dioxide in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
80% Ar / 2% CO2 M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.
50% Ar / 50% CO2 M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 47 litre steel cylinder at 90 bar.
M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
80% Ar / 2% CO2 M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.
50% Ar / 50% CO2 M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 47 litre steel cylinder at 90 bar.
M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M24 ArCO7 / 2.5 Ferromaxx® 7 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 7% Carbon dioxide in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.
M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M24 ArCO7 / 2.5 Ferromaxx® 7 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 7% Carbon dioxide in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.
I3 ArHe30 Alumaxx® Plus weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
70% Ar / 30% He I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
50% Ar / 50% He I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
75% He / 25% Ar I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
I3 ArHe30 Alumaxx® Plus weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
70% Ar / 30% He I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
50% Ar / 50% He I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
75% He / 25% Ar I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
I3 ArHe30 Alumaxx® Plus weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
70% Ar / 30% He I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
50% Ar / 50% He I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
75% He / 25% Ar I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
I2 (100% He) Helium Technical grade 4.6 (99.996%). An inert gas, technical Helium is used for lifting (airships and balloons), as well as for leak detection, optical fibre production, and as a shielding gas for welding. It is the preferred shielding gas for high power laser welding. Its high thermal conductivity produces welds with an excellent aspect ratio. Its high ionisation potential results in good plasma suppression and high weld speeds. Supplied in a 47 litre steel cylinder at 300 bar.
I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
I3 ArHe30 Alumaxx® Plus weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
70% Ar / 30% He I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
80% Ar / 2% CO2 M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.
50% Ar / 50% CO2 M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 47 litre steel cylinder at 90 bar.
I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
I3 ArHe30 Alumaxx® Plus weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
70% Ar / 30% He I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
50% Ar / 50% He I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
75% He / 25% Ar I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.
R1 ArH2 Inomaxx® TIG weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.
50% Ar / 50% He I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.